M-Audio Keystation Mini 32, Руководство пользователя

Страница: 23 / 45

Chapter 4: Edit Mode
19
Keystation Mini 32 User Guide
6
Press the “ENTER” key (G, last white key on the right), the Edit light will dim to half brightness indicating
that programming is complete.
7
Press the “PB>” button while playing to hear how the Pitch Bend will occur faster than before.
To return the Pitch Bend Rate to the default setting:
1
Press the Edit button. The Edit button light will illuminate to full brightness.
2
Press the “PB RATE” key (E, 3rd white key from the left).
3
Press the “DEFAULT” key (C, 8th white key from the left). The Edit light will dim to half brightness indi-
cating that programming is complete.
Volume Knob
The Volume Knob can is also assignable to any of the 131 parameters listed in Appendix D, “Standard MIDI
CC Numbers” on page 30.
To assign the Volume Knob to an effect:
1
Press the Edit button. The Edit button light will illuminate to full brightness.
2
Press the “KNOB ASSIGN” key (F#, 1st black key from the right).
3
Use the Numerical Data Entry keys (0 - 9) to enter the number of the parameter you want to assign to the
Volume Knob.
4
Press the “ENTER” key (G, last white key on the right), the Edit light will dim to half brightness indicating
that program-ming is complete.
5
Move the Volume knob clockwise to increase the parameter value.
If you make an error while entering the value, press the “CANCEL” key to exit Edit Mode without making any changes.
As an alternative to steps 3 through 5, you can use the “+” and “-” buttons to change the value.
The PB Rate setting is retained when the keyboard is turned off.
If you have made an error while entering the parameter number, you can press the “CANCEL” key (C, first white key on
the left) to exit Edit Mode without making any changes.
As an alternative to step 3, you can use the “+” and “-” buttons to change the parameter.
CA
N
C
E
L
Panic
P
B
Rate
Mod Rate
V
elocity
Sust
ain Mode
Default
0 1 2 3 4 5 6 7 8 9
EN
T
E
R
Dat
a = Oct
acve
Dat
a = T
ranspose Dat
a = Program
Dat
a = B
ank L
S
B
Dat
a = B
ank M
S
B
Dat
a = Channel
Dat
a = T
uning
Program B
ank L
S
B
B
ank M
S
B
Mod Assign P
B
Assign
K
nob Assign