background image

Delta 1010 Quick Start Guide

2     

|

3.   At various points in this installation process, you may be 

notified that the driver being installed has not passed 
Windows Logo Testing  2 . Click “Continue Anyway” to 
proceed with the installation.

4.   Once the driver installer has completed, select “Yes, I 

want to shutdown my computer now” and click “Finish.”

5.   When your computer has turned off, disconnect the AC 

power cable and open your computer’s case.

6.    Touch your computer’s metal chassis to ground yourself 

before coming in contact with any electronic components 
inside the computer. Uncontrolled discharge of excess 
static electricity may cause damage to electronic 
components. 

7.    Each unused PCI slot should have a metal bracket that 

covers the slot’s accompanying access hole on the rear of 
the computer.  Select one available PCI slot and remove 
its metal bracket.  Be sure to save the bracket screw 
(brackets are usually held in place by one screw) as you 
will need it later.

 

 

Note: 

Note: Some of your motherboard’s PCI slots may 

be sharing resources with some of your computer’s other 
components (e.g. the USB controller or the AGP slot). 
This may result in performance issues that are often 
difficult to pin down and resolve. As a preventive measure, 
please check your motherboard’s documentation in order 
to find an available PCI slot that does NOT internally 
share resources.   

2

Содержание DVR











Отзывы: