4
To set AIR 192|8 as your default playback device, follow the directions below based on your
computer’s operating system.
Windows:
1.
Use the included USB cable to connect the AIR 192|8 to your computer.
2.
In the Taskbar, locate the
Volume Control
"speaker" icon. Right-click the speaker and open
Sound
Settings > Sounds
.
Alternatively, go to
Start Menu > System > Sound > Sound Control Panel
.
3.
In the
Windows Sound
control panel select the
Playback
tab and select
AIR 192|8
as the
default device.
4.
Click the
Recording
tab and select
AIR 192|8
as the default device.
5.
Click
Properties
in the lower right-hand corner.
6.
In the new window, click the
Advanced
tab and select
2-channel
,
24-bit
,
48000 Hz (Studio
Quality)
as the default format.
7.
Uncheck both boxes under
Exclusive Mode
.
8.
Click
OK
to close the Properties window.
9.
Click
OK
to close the Sound control panel.
macOS:
1.
Use the included USB cable to connect the AIR 192|8 to your computer.
2.
Go to
Applications > Utilities > Audio MIDI Setup
.
3.
In the
Audio Devices
window, select
AIR 192|8
in the left column.
4.
Right-click
AIR 192|8
, and select
Use this device for sound input
.
5.
Right-click
AIR 192|8
, and select
Use this device for sound output
.
6.
Quit Audio MIDI Setup.
Setting Up AIR 192|8 with Pro Tools | First M-Audio Edition
1.
Use the included USB cable to connect the AIR 192|8 to your computer.
2.
Open Pro Tools | First M-Audio Edition.
3.
Go to
Setup > Playback Engine…
.
4.
Open the
Playback Engine
dropdown menu and select
M-Audio AIR 192|8
.
Note:
You may need to save and restart your project.
5.
Select your
Sample Rate
and then click
OK
to close the Setup window.
6.
Go to the
Setup >
I/O
and select
M-Audio AIR 192|8
for the
Input
and
Output
devices.
You can now add tracks to send and receive audio and MIDI from sources connected to AIR 192|8
inputs and stream recorded audio back through the AIR 192|8 outputs.
Setting Up AIR 192|8 with Ableton Live Lite
1.
Use the included USB cable to connect the AIR 192|8 to your computer.
2.
Open Ableton Live Lite.
3.
Go to
Preferences > Audio
tab.
4.
Click on
Driver Type
to select
CoreAudio
(Mac) or
ASIO
(Windows).
5.
Select
AIR 192|8
in the
Input
and
Output Config
section.
6.
Select your
Sample Rate
and then close the audio preferences window.
You can now add tracks to send and receive audio and MIDI from sources connected to AIR 192|8
inputs and stream recorded audio back through the AIR 192|8 outputs.
