21 Hubert Mathew Road
Illiondale
1609
South Africa
Tel: +27 11 452 4737
Fax: +27 11 452 4738
manufacturing and minor inventions
M.A.M.I.
WASHER
LOCK WASHER
WASHER
LOCK WASHER
WALL PLUG
WALL PLUG
SILENTRON
MOUNTING
BRACKET
ADJUST FOR
INCLINATION
ADJUST FOR
INCLINATION
SUN / RAIN SHIELD
SILENTRON
TAMPER
MAGNET
SILENTRON
OUTDOOR
DETECTOR
SLIDE
INTO
BRACKET
FRONT VIEW
TIPICALL
Y
1.3 m
FROM GROUND
MOUNTING BRACKET
for
SILENTRON WIRELESS
OUTDOOR DETECTOR
d) LED exclusion:
for safety reasons and to reduce power consumption disable the LED indication. This is done with dip-switch 4 set to ON.
LEDs remain functional in TEST mode.
e) Temperature compensation:
the function consists in the automatic adjustment of the PIR sensitivity when the temperature in the
device exceeds 30°C . this function is enabled by placing dip-switch 6 to ON. In case of exposure to the sun the temperature inside the
appliance can be much higher than the environment temperature.
TECHNICAL FEATURES (see diagrams also)
Power supply:
4.5V via three AA 1.5V 2.2Ah batteries – Current consumption 70uA at rest, 40mA in transmission – Autonomy of about 2
years, which could be greatly reduced in the case of a busy area and with LED active during normal functioning (dip-switch 4).
Functions:
indication of movement in the protected area (intruder alarm) – tampering – supervision – flat batteries.
Radio transmissions:
coded at 64 bit in simultaneous Dualband frequency – frequencies and power in compliance with the regulations.
Range of about 100 m in free space and without interference on the frequency bands.
Warning! To keep the declared environmental class, it is necessary to tighten properly the screws closing the device !
M000060