M/A-Com BS-010700-001 Скачать руководство пользователя | Manualshive

Страница: 39 / 62

background image

MM-010539-001, Rev. P6G

39

7.7.2 Installing

a

Directional Antenna

The directional antenna can be mounted on the Client using the universal mounting bracket. This
mounting bracket is located on the antenna mounting face (cover) of the Client. The universal mounting
bracket can then be adjusted to point the forward beam pattern of the antenna in the direction needed for
network connectivity.

A low loss RF cable (not included) is needed to connect between the Client antenna connector and the
Directional Antenna. We recommend selecting an RF cable with <1dB loss at 5 GHz. and not more than
five (5) feet long.

To mount the directional antenna to the Client:

1.

Using the four bolts, lock washers and flat washers included in the optional antenna mounting kit,
attach the universal antenna mounting bracket to the Client as shown in Figure 7-2.

2.

Attach the antenna panel bracket assembly to the antenna panel.

3.

Attach the two bracket assemblies together with the universal knuckle.

4.

Attach the short RF cable between the antenna and the Client antenna port.

Recommend using < 5 ft. long LMR-400 Low loss coaxial cable with field installable N Type Male
connectors, M/A-COM # MAMROS0095.

Figure 7-2: Mounting a Directional Antenna to the VIDA Broadband Client

7.8 RADIO CHASSIS AND CABLING

7.8.1 Attaching Client Cables

To connect power to Client

1.

Connect the M/A-COM power cable to the proper power source.

2.

Mate the other end of the power cable’s connector to the 3-pin power connector on the Client by
visually aligning the key and firmly push and turn the outer locking ring clockwise until it stops. A
click will be sensed to confirm proper mating.

3.

For added protection against long-term exposure to weather, industry techniques for sealing the data
connection may optionally be performed.

«
...
37
38
39
40
41
...
»

Содержание BS-010700-001































































Отзывы:

Нет отзывов

Похожие инструкции для BS-010700-001

Бренд: Icom Страницы: 42

Бренд: Icom Страницы: 32

Бренд: Icom Страницы: 39

Бренд: Icom Страницы: 7

Бренд: Icom Страницы: 32

Бренд: Icom Страницы: 13

Бренд: Icom Страницы: 294

Бренд: Icom Страницы: 4

Бренд: Icom Страницы: 2

Бренд: Icom Страницы: 8

Бренд: Icom Страницы: 36

Бренд: Icom Страницы: 32

Бренд: Icom Страницы: 96

Бренд: Icom Страницы: 24

Бренд: Duevi Страницы: 4

Бренд: Rock Mars Страницы: 18

Бренд: Boss Audio Systems Страницы: 23

Бренд: VDO Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды