153.774UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
The LR30 is a signal repeater designed to allow extended runs of 12V or 24V RGB LED tape
and strip. Any RGB LED tape controller has a limited amount of current capacity, which means
that it can only control a limited length of LED tape. The LR30 acts as a signal repeater or
amplifier so that further len
gths of tape can be added to the controlled “incoming” length of
tape and all colours will be repeated across both tapes.
Setting up
Connect the Blue, Red, Green and connections at the end of the incoming
tape to the B, R, G and + screw terminal
s labeled “
INPUT
”
Connect the Blue, Red, Green and connections at the beginning of the
continuation tape to the B, R, G and +
screw terminals labeled “OUTPUT”
Connect an appropriate DC power supply for the LED tapes (either 12V or 24V) to the
screw terminals labell
ed “
POWER
”
1. POWER
12Vdc or 24Vdc power supply connection
2. OUTPUT
Blue, Red, Green and connections to continuation LED tape
3. INPUT
Blue, Red, Green and connections from incoming LED tape
