230V LED STRIP - SMD5730
Item ref: 153.821UK, 153.822UK, 153.823UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing Fluxia high voltage LED strip as part of your lighting scheme. This strip is designed to
provide a powerful linear lighting source for indoor or outdoor installations. Please read these instructions to
help with installation and ensure correct practice when cutting and joining.
Warning: This product is mains operated and should only be fitted by a qualified electrical installer.
Installation
Fluxia 230V LED strip is supplied as a 50m reel with a mains lead connected at one end and terminated with
an end-cap at the other. Straight from the reel, the strip can be plugged into a mains 230Vac outlet and the
strip can be situated indoors or outdoors, thanks to the IP67 containment (the mains lead and plug must be
indoors or in a waterproof housing).
50m is the maximum length that can be powered from a single 230V mains outlet.
The strip can be cut to fit any installation at 1 metre intervals. The strip containment is diffused on all sides
with a transparent centre strip for the bright LED output. Looking at this strip, it is possible to see where the
PDB inside is joined every 1 metre (there is a gap between the ends of the PCB).
Ensure that the strip is not powered before cutting and cut cleanly through the whole containment.
