Using VCV Voice Control Volume Switch Function
• The
VCV
switch will prioritize the microphone over the music playback. When the VCV is enabled the music will be silenced
when there is an announcement through the microphone. This is very useful for announcements during a party, for example.
Connecting to Bluetooth
1. Press and hold the Mode Button (#1a). Display will read “Blue.”
2. Turn on Bluetooth function on mobile device you wish to pair.
3. When “LYXPRO” appears on your mobile device, select it.
4. There will be a short “beep” sound. Devices are now paired.
Using the Remote Control
•
In addition to the panel controls, an infra-red remote control is included for the USB/SD player which provides additional
functions to allow greater control over the media player.
•
To operate remote control, remove the clear plastic tab to activate the battery.
•
In order for the remote to operate properly, ensure that it is pointed toward the front of the speaker.
Specifications
Speaker Type:
Active
Frequency
Response:
70Hz-18KHz
Power
Output:
70W
Maximum Sound Pressure Level (SPL):
110dB
Nominal
Sensitivity:
93dB
Impedance:
4ohm
Low Frequency Driver:
12" Woofer 30 oz. 1.5" VC 4 ohm
High Frequency Driver:
1" Ti. Diap 8ohm
Enclosure Material:
Plastic
Input Connections:
1/4" Mic/Line Input, Aux Input, 2 RCA Line
Input Dimensions:
25.5” x 16.5” x 14.17"
Weight:
39.6 lbs.
This product is covered by a limited one-year warranty. Please see warranty information on our website at www.lyxpro.com.
Customer Service:
[email protected]
866-849-3049
www.lyxpro.com
Distributed by
C&A Marketing, Inc.
2 Bergen Turnpike
Ridgefield Park, NJ 07660
MADE IN CHINA
LyxPro is a trademark of
C&A IP Holdings, LLC
©2016 All Rights Reserved
3
