Thank you for purchasing the LyxPro CMG-50 Shotgun Microphone.
The LyxPro CMG-50 Shotgun Microphone is designed especially for
use with video cameras. Low noise and optional battery operation
make this mic ideal for professional film, video, and television
production applications, in the field or in the studio. Due to its high
directivity, the CMG-50 picks up sound directly from where the
camera is pointing and effectively diminishes noise from the sides
and rear.
What’s Included
• CMG-50
Microphone
• Mount
• Windscreen
• Storage
pouch
• User
guide
Safety Precautions
• Use this product only for its intended purpose.
• Do not immerse any part of the product in water or other liquids.
• Do not use the product in a humid environment or near water.
• Do not expose the product to direct sunlight, heat sources, or
open
flames.
• Do not cover or obstruct the ventilation openings when operating
the
product.
• Do not attempt to disassemble the housing.
• Do not connect to non-compatible devices.
Connecting to Power Source
• The CMG-50 uses a P48V phantom power supply (included with
most professional video cameras or mixing consoles). In addition,
this microphone can also be powered by an internal 1.5V AA battery.
• To insert battery, turn the base of the microphone counterclockwise.
• Slide the cover to open the battery compartment (The cover will
not come off entirely. Do NOT force it). Insert the battery,
matching the polarity (+/-).
• Close the battery cover and turn the base of the microphone
clockwise. Do NOT over-tighten.
• To preserve battery life, remove the battery from the microphone
when not in use.
General Operation
• This microphone incorporates a switchable high pass filter. This
is used to remove low frequency noise that is not part of your
intended sound source. This will affect the tonal characteristics,
so it is important to listen to the sound with and without the HPF
in circuit to decide if it is appropriate for the source.
• The HPF is activated by a recessed switch located above the
battery compartment. A small screwdriver should be used to
access the switch as it is designed to prevent accidental toggling.
• This microphone comes with a foam windscreen. Use of this
windscreen helps prevent sound interference caused by breezes
or
wind.
• When using the microphone outside in heavy winds, a more heavy-
duty windscreen may be needed to provide additional protection.
2
