Lyte Cube480, Инструкция по эксплуатации

Страница: 9 / 24

9
Remote Overview (Cont.)
If the operation is still unable to pair to the remote, go onto the settings
to pair it manually. Using the navigation and power buttons, enter the
home page Menu. Choose “setting”=> “ Bluetooth® setting”. Press and
hold the
OK button together with the Volume - button on the remote
for 5 seconds. The remote control LED will fast flash for pairing. Select
the “SONG-1” device by using the navigation button on the unit and
press the
OK button to confirm.
Note : You should only need to pair the remote the first time you ever
use the projector.
Every time you turn on the projector, once into the home screen, press
any button on the remote and the remote will connect to the projector
in under 10 seconds.
When the remote is not being used for a few minutes, it will disconnect
from the projector in order to save battery. Press any button on the
remote to reconnect to the projector (takes under 10 seconds).