1
1.
Open steps until folding frame A mechanisms
lock at B. Secure knuckle joint with pin B.
2.
Fit horizontal brace to bottom rung of the back of the
step for extra stability.
4
4.
Fit work platform C at platform height H1.
5.
When working at platform height one (H1), ensure that
the guardrail (G1 & G2) is in the retracted position.
2
3
D
D
3.
Fit small platforms D to form steps up to the top
platform. Ensure the locking mechanisms of the hooks
have engaged.
To lock castors press lever 1
To unlock castors press lever 2 only
To adjust brake turn bolthead 3
5
6.
When working at platform height two (H2), the guardrail
must be extended using expansion pack (EX1 and EX2).
7.
To extend guardrail, ensure all four spring clips are
disengaged from frame section (see fig 6).
• Raise handrail until locating hole becomes visible - re-
engage spring clips.
• Fit additional braces horizontally from frame G1 to G2 at
front and rear of work platform, to provide an all round
lockable guardrail system.
8.
Fit additional horizontal brace between the upper step and
platform
6
Lyte Podium Steps