If you are positioning the LytePOD
with a side elevation against a surface/
wall or are applying a lateral force
from the side of the podium, position
one stabiliser at a 90 degree angle
which is perpendicular to the podium
and the other stabiliser parallel to
the surface/wall. Fully tighten up the
clamps on each stabiliser and ensure
both are secure.
STEP SEVEN
STEP EIGHT
When the LytePOD is situated in an
open area and work is being carried out
overhead or from the rear of the podium,
position the stabilisers at a 45 degree
angle as shown in the image.
Read the instructions.
Ensure all components are present
and correctly fi tted before use
Inspect before use
Only ascend or descend the Podium
using the access provided
Face the access when
ascending and descending
Do not use on loose
or slippery surfaces
Never more than
one person
Do not
overreach
Never stand on the side protection
or use boxes, stepladders or other
objects to gain extra height
Do not use
Damaged Equipment
Never stand on the
access ladder to work
Do not use on sloping or uneven surfaces,
where the Podium is not fi tted with
a means of levelling the Podium, such
as adjustable legs. Contact the
manufacturer for further information
Never work near
power lines or other
electrical Equipment
Never use as a means
of access to another place
Never move when a
person is standing
on a work platform
Beware of fi nger traps
Ensure all brakes are locked, where
the Podium incorporates brakes
e.g. Caster Wheels
Working platform must be level
Ensure side protection gate is
closed and secure before use
LADDERS
I
TOWERS
www.
lyteladders
.co.uk
01792 796666
LY
TEPOD/A
G 08/17
OPTIONAL TOEBOARD FITTING
If you are using toeboards, please
attach to the podium as shown in
the image. The LytePOD can now
be used safely.
STEP NINE
When the LytePOD is situated
in an open area and work is
being carried out on either side
elevation of the podium, position
the stabilisers at a 90 degree
angle as shown in the image.
