4
3. Technical parameters of the
tanks
Technical parameters
mixer 500 L
mixer 1000 L
mixer 2000 L
dimensions -
Ø900 (external) x
1900
dimensions -
Ø10330 (external)
x 2265
dimensions -
Ø1430 (external)
x 2350
Power supply -
400 V
Power supply -
400 V
weight
– 160 kg
weight
– 225 kg Weight – 390 kg
Engine power -
0,55 kW
Engine power -
1,1 kW
Engine power -
2,2 kW
Power of the
heating cable -
1,6 kW
Power of the
heating cable - 2
x 1,25 kW
Power of the
heating cable - 2
x 1,6 kW
Execution
–
stainless acid-
resistant steel
Execution
–
stainless acid-
resistant steel
Execution
–
stainless acid-
resistant steel
2” ball valve
2
” ball valve
2
” ball valve
connector
Ø60
connector
Ø60
Connector
Ø60
3.1.
Operation principle
•
The tank is to be placed in the place
intended for the purpose, well levelled.
•
Fill the tank with honey.
•
Connect to the mains 400V
•
Set up the controller to maximum
temperature of
55ºC, according to the
description contained in chapter 3.
•
Discharge the stirred honey through a ball
valve.
•
A hose may be connected to the valve
connector.
•
Once the device operation has terminated,
it must be disconnected from the mains
and its cleaning may start, in line with the
description contained in the chapter
MAINTENANCE.
4. Handling the controller
HC-01 temperature regulator has been mounted
on the device
Heating Controller
c
4
5
6
3
1
2
4.1.
Setting up the controller
1.
Prior to plugging in the device to the
mains, one must make sure that the controller is
switched off.
2.
Switch (0/1) on the control panel shall be
in “0” position
3.
Once plugged in to the mains, Switch (0/1)
shall be moved from “0” position to “1” position
4.
Controller should be programmed in line
with individual needs
5.
In order to enter the programming mode
(Prog), buttons “+” and “-“ must be pressed at the
same time during controller start-up.
4.2.
Starting work with the
controller
1 – signalling the work state
Indicator lights up
– temperature regulator
switched on, indicator dimmed
– temperature
regulator switched off (controller operates as an
ordinary
thermometer),
indicator
flashes
–
temperature regulator switched on and initial
heating in progress