Photo no 13. Setting the roll delay II
Actuator delay – this parameter is set when we see that pneumatic actuator (with two rolls – see photo)
presses a jar too early or too late. By pressing the parameter “actuator delay” we select the required
value and press ENTER.
Photo no 13. Numerical panel
Once ENTER has been pressed, the panel returns to the main panel option. Pressing the STOP button
causes the device to stop operation
Photo no 14. Main panel II
4. Storing the jar labelling machine
Once the operating actions have terminated, clean the device thoroughly and cover it to prevent the
dust from penetrating.