C MX 5710 Reference Manual. Rev 1.0
Page 24 of 36
Matrix Control
With this control mode activated, hovering over
the audio crossbars will show a checkered
matrix field.
The switching principal is identical to a
traditional matrix. Move the mouse pointer to
the cross point where the desired input and
output cross and press the left mouse button.
The switched cross points are indicated by a
blue frame around the cross point
To access the mono controls, right click on the
desired cross point and select “Show Mono
Controls”. The column of the selected cross point will
then be shown with left and right selection cross
points.
To exit the mono control simply move the mouse
outside of the audio cross bar matrix.
Drag & Drop
To have this switching mode activated,
the entry “Audio Crossbar Matrix” needs
to be de-selected.
An output can be connected to a new
source by simply clicking onto an existing
connection and dragging and connecting
the open handle to the desired source
signal
One single white line in this diagram
represents
a
stereo-connection
(containing a left and a right channel). If
required, the left and right signals can be
connected independently (to perform
mono-switching).
Access to the individual mono-channels is
given by clicking the Right Mouse Button
onto a white AES line and then selecting
“Show Stereo Channels” from the menu
(Figure 19: Audio Mono Crossbar).
Figure 19: Audio Mono Crossbar
Figure 18: Audio Crossbar Operation
Figure 16: Audio Matrix
Figure 17: Mono Controls
