Lynx Yeti 550, Руководство оператора, Страница: 52 / 104

VEHICLE WARM-UP
Before every ride, vehicle has to be
warmed up as follows:
Snowmobile must be securely sup-
ported by the rear bumper using a
wide-base
snowmobile mechanical
stand. Track must be 100 mm off the
ground.
Start engine and allow it to warm up
two or three minutes at idle speed.
Release barking brake.

WARNING
Make sure wide-base snowmobile
mechanical stand is stable. Stay
clear of the front of vehicle and the
track. Do not use too much throttle
during warm-up or when track is
free-hanging.
Apply throttle until drive pulley en-
gages. Let track rotate at low speed
for several turns. The lower the vehi-
cle temperature is the longer vehicle
warm-up should be.
Shut-off the engine and remove the
wide base snowmobile mechanical
stand.
Skis may be frozen on the ground.
Grab both skis one at a time by their
loops and lift their front end slightly off
the ground.
After restarting engine, the vehicle can
be driven at low speed for the first 2 or
3 minutes of riding. After that, it may
be driven up to the legal speed limit as
per normal safety practices.
50
______________________