15
6<03721(QJLQHPLVILUHV
3266,%/(&$86(6
:+$772'2
DESS did not read cap code.
Engine cannot reach pulley
engagement speed.
DESS pilot lamp blinks once every 1.5
seconds. properly install tether cord cap.
DESS has read a different code than
the one programmed. Engine cannot
reach pulley engagement speed.
DESS pilot lamp blinks rapidly (3 times per second).
Install a cap (key) for which this snowmobile
was programmed.
Fouled/defective/worn
spark plugs or wrong gap.
Clean/verify spark plug and heat range.
Replace as required.
Too much oil supplied to engine
(SDI only).
Improper oil pump adjustment, refer
to an authorized
Lynx
dealer.
Water in fuel.
Drain fuel system and refill with fresh fuel.
6<037216QRZPRELOHFDQQRWUHDFKIXOOVSHHG
3266,%/(&$86(
:+$772'2
DESS did not reach cap code.
Engine cannot reach pulley
engagement speed.
DESS/RER pilot lamp blinks once every
1.5 seconds. properly install tether cord cap.
DESS has read a differerent code than the
one programmed. Engine cannot reach
pulley engagement speed.
DESS pilot lamp blinks rapidly (3 timer per
second). Install a cap (key) for which this
snowmobile was programmed.
Drive belt.
Check item "Engine lacks acceleration or power".
Incorrect track adjustment.
See MAINTENANCE and/or an authorized
Lynx dealer for proper alignment and tension
adjustments.
Pulleys misaligned.
Contact an authorized
Lynx
dealer.
Incorrect drive pulley adjustment.
See MAINTENACE and/or authorized
Lynx
dealer for proper drive pulley adjustment.
Engine.
See items "Engine lacks acceleration or power".
