LX-F6
LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com - [email protected]
11
CONFIGURING THE CABINET DSP OPTIONS.
From the buttons below the display on the Lynx cabinet’s back panel you are able to configure the Basic
adjustment functions of the internal DSP.
NOTE:You must apply the desired configuration in each cabinet. This is done via the buttons located on the back
panel of the cabinet and requires electrical power to work.
From the LX cabinet’s back panel you are able to configure 4 basic internal DSP adjustments:
- Number of cabinets in the array to apply shelving equalization for frequency response correction.
- Air absorption compensation at various “throw” distances.
- Enable or disable the Inclinometer.
- Enable or disable the automatic correction feature.
Note
: Finite Impulse Response (FIR) filters are used in the signal processing of the LX-V8 cabinet. FIR is a type of
digital filter with linear phase characteristics. This frees system designers from the constraints of phase anomalies
associated with analogue filters or their digital versions (IIR, Infinite Impulse Response). When properly used, FIR
filtering can audibly improve a system’s impulse response and reduce crossover interference.
CONFIGURATION PANEL
On the back panel you will see 3 buttons and an information screen, on which you can read the established parameters
and information such as digital or analog input, amplification module temperature, input signal level and name of the
current preset (Fig1). If changes are not made the display will automatically dim to save energy and avoid unnecessary
light in situations where light is not wanted. To re-activate the light simply press the OK button.
Fig 1
Содержание LX-F6
Страница 43: ......