NAPOLI PIZZA OVENS CARE & USE/INSTALLATION
|
23
The oven arrives nearly ready to use and requires only
minor assembly.
By carefully following the uncrating and unpacking steps,
you will improve the customer’s first Lynx experience.
Shipping weight on smaller units is app. 300 pounds and
larger units may weigh over 500 pounds.
CRATE & CARTON
• IMPORTANT! Do not remove staples around the top of
the carton. These staples hold a wooden pallet in place
inside the carton that protects the unit from damage.
Removing these staples may cause the pallet to fall on
the top of oven.
The LPZA Pizza oven can be used as a freestanding
model when used with the LPZAF cart assembly (available
separately).
The cart assembly comes fully assembled and provides a
convenient counter space to mount your oven. The oven is
mounted on the counter top without the use of fasteners
and provides ample counter space and storage space for
all of your tools and accessories.
How to Remove the Carton
1. Cut the main strap holding the oven to the pallet.
2. Remove the staples at the bottom of the carton.
3. Lift off the carton.
4. With assistance, remove the oven from the pallet and
place into desired location.
The wheels of the LPZAF cart sit down in the gaps of the
shipping crate so the cart can sit safely and solidly on the
crate during shipping. The cart cannot be slid directly off of
the pallet.
One way to safely move
the cart off of the pallet
is by lifting one end of
the oven high enough to
place a ramp under the
wheel and then lift the
other end while rolling
the oven off of the pallet.
INTERIOR PACKING
Lynx uses sturdy tie-down cables and straps to ensure your
oven arrives at your home in the same condition that it
left our factory. BE SURE YOU HAVE REMOVED ALL TIE
DOWNS BEFORE USING YOUR OVEN.
Remove any loose items from the packaging and firebox.
UNPACKING & ASSEMBLY
Use two or more people to move or install this
unit. Failure to follow this instruction can result in
back or other personal injuries.
WARNING:
EXCESSIVE WEIGHT HAZARD!
Cart will not
slide directly
off pallet.
