Lynx LM15ICER Скачать руководство пользователя страница 15

15

CARE AND USE/INSTALLATION

Turning your ice machine On and Off:

If your appliance is on, "ICE" will be displayed. 

To turn the appliance off, push and hold the "ON/

OFF" icon for 3-seconds. The display will show 

"OFF" . 

The drain pump (if equipped) and the interior light 

will still be functioning during the OFF mode. To 

turn the appliance back on, press and hold the "ON/OFF" 

icon for 3-seconds, the display will show "ICE". 

ICE

ICE

OFF

USING YOUR ELECTRONIC CONTROL

Control Lock:

The user interface can be locked to avoid uninten-

tional changes from things like cleaning. To lock 

the appliance, push and hold the "LOCK" icon for 

5-seconds. The "LOCK" icon will flash 3 times, then change 

to steady back-lit. To unlock the user interface, press and 

hold the "LOCK" icon for 5-seconds, and the back-light will 

turn off.

NOTE

NOTE

The "LOCK" icon is the only active key in this mode. If other 

icons are pressed while in the lock mode the "LOCK" icon 

will flash 3 times, and an audible tone will sound, to remind 

the user the appliance is in the lock mode.

When turned off, the ice machine will complete its 

current ice production cycle then shut off.

Turning the ice machine "OFF" will only terminate the 

ice production, it does not remove power from the ap-

pliance. Always unplug the power cord from the wall 

outlet before servicing the unit.

!

WARNING

Door ajar alarm:

If the door is open, or not closed properly for 5 

minutes the "DOOR" indicator will illuminate and 

flash and an audible tone will sound. The audible 

alarm can be muted by pressing the "Lock" keypad.

This alarm condition can be reset by closing the 

door or momentarily pressing the "ON/OFF" icon, 

(i.e.-if you are cleaning the storage compartment, etc.). The 

alarm will recur in 5 minutes if the alarm condition persists.

DOOR

Delay start/Vacation mode:

Your ice machine is equipped with a delay start function. 

This feature can be used to temporarily shut the appliance 

off for 1, 4, 6, or 8 hours or days. Upon completion of the 

selected delay period, the appliance will resume operation. 

This is ideal for temporarily stopping ice machine noises or 

to save water and electricity if you are away from home but 

want fresh ice upon your return.
 To enter the delay start mode, press the "CLOCK" 

icon while the appliance is in "ICE" mode. This will 

delay the next harvest by the time displayed. Each 

additional press of the "CLOCK" icon will add time, 

from 1, 4, 6, or 8 hours, to 1, 4, 6, or 8 days. The next 

press after 8 days will leave delay set 

mode. After the desired time has been 

selected, press the "ON/OFF" icon for 2 seconds 

to accept, your unit will shut off and  a clock icon 

and your selected time will be displayed. When the 

selected time has elapsed, normal ice production will 

resume.

To cancel the delayed start, press and 

hold the "ON/OFF" icon until the appli-

ance enters OFF, then press and hold 

the "ON/OFF" icon again until the appli-

ance enters "ICE" mode.

1

4

6

8

hours

days

ICE

OFF

Содержание LM15ICER






























Отзывы: