Lynx L500FLP, Руководство по эксплуатации и установке

Страница: 20 / 40

20
|
SEDONA CARE & USE/INSTALLATION
COLD WEATHER WARNING: PROPANE
LIGHTING YOUR GRILL
... continued
MANUAL LIGHTING
If a burner doesn’t light after several attempts, it can be
match lit using the lighting rod stored in the drip tray.
First, make sure you’ve returned all of the control knobs
to the OFF position and have allowed 5 minutes for any
accumulated gas to dissipate before attempting to match
light a burner.
Main Burner
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate into the front slot of the
briquette tray for that burner.
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn
the knob off and wait 5 minutes before attempting to
light it again.
ProSear™ Burner
To match-light this burner, use the lighting rod to insert a lit
match through the cooking grate.
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn
the knob off and wait 5 minutes before attempting to
light it again.
Rotisserie Burner
To manually light this burner, use the lighting rod to hold
a lit match at the face of the burner, push in and turn the
control knob to the “LITE” position. Hold the knob in for
at least 30 seconds. If the burner does not stay lit, turn the
knob OFF and wait 5 minutes for gas to dissipate before
attempting to light it again.
WARNING
Extremely cold temperatures may cause your ProSear™ burner to light
inside
the burner instead of
outside
. Once lit, if you hear a ‘whooshing’ sound, immediately turn the burner knob off to extinguish
the flame and then immediately re-light the burner.