Page 7
Lynx Grills Inc.
L15WINE
APPLIANCE OPERATION
INTERIOR LIGHTING
The refrigerator uses a clear-transition white light and a blue LED interior lighting system which can provide
crisp white light for viewing the products, and a cool blue LED for aesthetic purposes.
A three way rocker switch located just inside the door in the upper right corner controls the interior lights.
When the rocker switch is off (centered) the white light comes ON only when the refrigerator door is opened,
and goes OFF when the door is closed. When the rocker switch is pressed ON (to the right), the white light
stays on, door opened or closed. When the rocker switch is pressed ON (to the left) the white light comes on
only when the door is opened, and the blue LED lights stay on when the door is closed.
The lights can be powered OFF completely by removing the kick plate, locate the ON/OFF rocker switch be-
hind the kick-plate and turning it OFF.
If the white lights or blue LED lights need replacement or service, contact Lynx Customer care for the location
of a service provider in your area.
LOSS OF POWER
In the event of a power outage or a temporary loss of power, unplug the refrigerator. After a loss of power
keep the refrigerator unplugged for at least 30 minutes to allow the refrigeration system to equalize. During
this time keep the door closed as much as possible to keep the interior as cold as possible.
REMEMBER: A full refrigerator stays cold longer than a partially filled one.
MOVING CARE FOR YOUR REFRIGERATOR
1. Remove all containers.
2. Unplug the appliance.
3. Clean it thoroughly.
4. Tape the appliance shut and tape the electrical cord to the cabinet.
5. When you get to your new location, refer to the “Installation Instructions” and “Appliance Use”
sections for information on installation and setting the controls.
*
Excessive Weight Hazard! * Use two or more people to move and install your refrigerator.
Failure to do so can result in back or other injury.
