LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
ionic-5CX
4. CABINET CONNECTIONS
4.1 Normative
The cabinet meet the following standards:
EN 55103-1:1996: Electromagnetic compatibility. Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use (-1 Emmision).
EN 55103-1:1996: Electromagnetic compatibility. Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use. (-2 Immunity)
EN 60065:2002: Audio, video and similar electronic apparatus. Safety requirements.
4.2 Connectors
The ionic-5CX have a connection panel at the rear of the cabinet. This consists of 2 internally bridged Neutrik
NL4-MP connectors which apply no process to the signal.
Note: If pins
±
2 are not used they will still be internally bridged.
7
To connect the speakon follow the instructions in fi g. 1
Insert the male speakon in its corresponding hole and turn right until it clicks. This fi xes it safely and strongly and
helps stop it being pulled out by mistake. At the other end of the cable connect in the same way to the amplifi er
channel.
Furthermore the cabinets HR-6 and HR-8 can be supplied with 4 terminal blocks (7.62 mm between pins) instead
of the Neutrik NL4-MP.
Connector
Connections per box
impedance
Rated power Program power
NL4MP
±1
2
16 Ohms
150 W AES
300 W AES
