LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
GXR
14
SELECT THE INPUT: DIGITAL OR ANALOG
This selection is only available when the user has requested the cabinets to be supplied with the Digital input kit.
There are four input options: Analog / Digital L / Digital R / Digital L+R
To select the input mode just press the OK button (3) and the up button (1), both at the same time but pressing
the OK button fi rst. Then you can select one of the four options using the up button (1).
To confi rm your selection press OK (3) until the progress bar fi nishes.
The display will show an inverted D (digital) or an inverted A (analog) so you can always know if the input is digital
or analog.
2
3
1
Fig 2
Fig 3
Fig 4
SELECT AND RUN PRESET
To change the preset confi guration (see Fig 2) just press the up button (1) and down button (2) until you see the
title and present number required and once found press OK (3) until the progress bar fi nishes (Fig 3). The display
will indicate “Loading DSP” (Fig 4)
Note
: In case of a power cut, the DSP will save its last confi guration when restarted.
