7
HOW TO INSERT THE RPS 6120 POWER SUPPLIES INTO
THE RACK FRAME
PS
Insert the power supply that came with your greenMachine into the power
supply mount. The power cable needs to be next to the power supply as
shown below.
Note:
The power supply should slide into the power supply mount without
resistance. If not, then remove the power supply and make sure the power
cord is positioned correctly.
Do not force the power supply into the mount.
Step 1:
Unlock and slide over the power supply support clip.
Step 2:
Step 3:
Slide over and push the power supply support clip foward to lock the
power supply.
Step 4:
Repeat this procedure for the second power supply if applicable.
