LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
ADP-28M
If you want to change the IP in order to be able to connect to the cabinet then just select the cabinet and modify
the assigned IP.
By default, the Cabinet will have this IP 192.168.1.100
The Network enviroment consists in the rst 3 sets of three numbers separated by dots. In order to detect/com-
municate with the cabinets, the software and the cabinets
must have the same Network settings
.
If it is not in the same environment Windows Profesional (2000, XP, VISTA) will detect it, but is not going to be
able to establish connection. In Windows Home, the processor is not going to be detected until the same enviro-
ment is applied.
In order to
change the IP
settings to have the same con guration as the PC, we can change the IP address of
the cabinets by clicking in the
Assign IP to select Device
button after writing in the box above the desired data.
Remember there cannot be two devices with exactly the same IP address, the last set of three numbers has to
be different and unique to each one of the devices.
14
