IdentiLynx SR/HRS Quick Start Guide
Page 1 of 4
Lynx System Developers, Inc.
IdentiLynx SR & HRS Full-Frame Video Cameras
Quick Start Guide
Verify that your IdentiLynx Full-Frame video system contains the components pictured below.
If not, or if you need additional help, please call: USA 978 556 9780 or email [email protected].
Item
Description
ID
Item
Description
ID
IdentiLynx Camera
and Tripod
IdentiLynx SR/HRS
Power Injector
for Power-
over-Ethernet
IDL-PoE
Protective Case
CP102
Power-over-
Ethernet
Power Supply
Connector
Included with
IDL-PoE
10’ (3 meter)
Ethernet Cable
C10BT-10
100’ (33 meter)
Ethernet Cable
with XLR-RJ45
connector
C10BT-100
Weatherproof
XLR-RJ45
connector
N/A
Items not included
•
Computer (laptop recommended) running Microsoft Windows. Your computer needs: one available serial port, or USB
port, and one available Ethernet port.
•
(Recommended) PoE+ Gigabit Hub/Switch
•
(Recommended) UPS Battery Backup
Introduction
In this quick start guide, you will learn how to set up and configure the IdentiLynx camera with your FinishLynx timing system
and play back full-frame video captured at the finish line.
NOTE:
Lynx recommends a
PoE+
Gigabit hub/switch
and a
Gigabit network card
as a minimum when adding the
IdentiLynx camera to your timing system.
