5
Attaching Drawer
Set drawer back on glide frame with
mounting holes of drawer and glide
frame aligned.
Attach drawer to glide frame
using mounting screws.
Only gently tighten.
4”
min.
101.6mm
2”
min.
50.8mm
4”
min.
101.6mm
•The use of a power screwdriver
•Drill 4 starter holes using an 1/8”
diameter drill bit.
Recommended:
Remove drawer from glide frame.
Move glide
rails forward.
Mount glide frame.
Install front screws first.
Mounting Glide Frame
4
© 2017 Lynk, Inc. 8241 Melrose Dr. Lenexa, KS 66214
LIMITED WARRANTY AND DISCLAIMER OF LIABILITY
The manufacturer warrants this product against defects in manufacturing and workmanship for a period of ninety (90) days from the date of purchase. For questions, call
(800) 733-5965 for customer service.
MANUFACTURER DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE WITH REGARD TO THE PRODUCT. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, INJURY TO PERSON OR PROPERTY, OR ANY OTHER INCIDENTAL, CONSEQUENTIAL OR
PECUNIARY LOSS), OR FOR ATTORNEY’S FEES OR COSTS, ARISING OUT OF THE USE OR OPERATION OF THE PRODUCT.
If you have questions, please call 800-733-5965
#453018 30” x 18” U - Shaped Undersink Drawer
R7-2
www.lynkinc.com
2