Lyngdorf Audio MP-60 – Owner’s manual
19
Error trying to activate one or two rear surround speakers without any side surrounds. The initial surround
sound speakers must be a pair of side surround speakers (LS & RS) – no matter where you position them.
Error trying to activate top or height speakers without the lower level speakers. features side surrounds for
optimal integration (LS, HS speakers). If you only can position surround speakers in the ceiling, these must
be designated as lower level surround speakers, as you are not creating a 3-dimensional sound field.
Note: If you set the Center speaker to ‘None’, the MP-60 will automatically route the
dialogue from the center channel into the Left and Right speakers.
As a rule of thumb, don´t make changes if you are not familiar with the consequences, and always make
Dialog boxes for speaker option
Speaker Size
When selecting a speaker size, you set the bass-cutoff frequency, and the signal information below this
frequency will be sent to the subwoofer(s). By selecting CUSTOM, you can specify the cutoff frequency
directly.
Gain
If this specific speaker is significantly lower in level compared to the other speakers, you can increase the
gain to match the overall level. This ensures, that the subsequent RoomPerfect™ calibration will run
perfectly. (highest and lowest speaker levels are then within optimal recording levels)
