Lyngdorf Audio CD-1, Руководство пользователя

Страница: 11 / 20

1 1
Rear Panel
1-2. Analog output right and left
RCA Connectors.
3-4. Analog balanced output right and left
XLR Connectors for balanced output.
5. Optical output
Toslink Connector for digital output.
6. AES Output
XLR Connector for AES output.
7. SPDIF
SPDIF output.
8. RS232 INPUT/AUX
AUX and INPUT RJ45 connectors
The RS232 communication connectors are for communication to a PC or remote control from Lyngdorf
equipment with broadcast commands or linked control between other components. The Input is looped
to Aux for daisy chaining of components. The ‘Input’ is used for connection to a PC/computer to upgrade
the fi rmware.
9. Mains Input
IEC320 type connector.
10. Power mode selection switch
The CD-1 has a large switch above the Mains Input (9) selected to the correct voltage for your location or
Country’s power supply. This switch is selected to either 115V or 230V operation.
Always check the correct voltage 115V or 230V operation has been selected for the
voltage in your location or country. Failure to do this may result in serious damage
to your CD-1 component.