background image

7994619P  

Rev. 11/19

Lyman

®

475 Smith Street 

1-860-632-2020

Middletown, CT 06457 

www.lymanproducts.com

LYMAN PRODUCTS WARRANTY

This warranty covers all products manufactured and supplied by Lyman Products as well as all its associated 

brands. Your Lyman Product has been produced under rigid standards of manufacture and inspection and 

are warranted against material defects and workmanship.

Products which are manufactured by Lyman Products are covered by a LIMITED LIFETIME WARRANTY. 

This warranty is extended only to the original consumer purchaser. All Lyman products are intended for 

non-commercial use by hobbyists. Any other use of these products will void the warranty. Should you 

believe that your product is defective in material or workmanship you must return the product to Lyman 

Products Corporation postage paid for evaluation. (See Return Policy) If the returning defective product 

meets the criteria of this warranty the product will be repaired or replaced at Lyman Products’ option at no 

charge, parts and labor are included.

Lyman reloading tools and accessories are warranted against defective materials and workmanship only. 

This warranty is void if the product:

(1) has been damaged by accident or unreasonable use, neglect, improper service or other causes not 

arising out of defects in material or workmanship;

(2) has been altered or repairs have been made or attempted by someone other than authorized factory 

personnel

(3) is used commercially

(4) has been altered or defaced in any way.

THE LIMITED LIFETIME WARRANTY DOES NOT COVER DEFECTS OR DAMAGE RESULTING FROM: COM-

MERCIAL USE, ABUSE, IMPROPER INSTALLATION, MODIFICATION, LACK OF CARE, MISUSE OR NORMAL 

WEAR AND TEAR. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE LIMITED TO THE DURATION OF THIS LIMITED LIFETIME WARRANTY. LYMAN PRODUCTS 

CORPORATION IS NOT LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT 

AND UNDER NO CIRCUMSTANCES SHALL LYMAN PRODUCTS CORPORATION BE LIABLE FOR CONSE-

QUENTIAL OR INCIDENTAL DAMAGES. HOWEVER, SOME STATES DO NOT ALLOW LIMITATIONS ON 

INCIDENTAL, OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 

APPLY TO YOU.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to 

state. Lyman Products is proud of our workmanship and quality that we build into our products. While our 

products are warranted against defective materials and workmanship we cannot warranty;

• Product sales to government or local law enforcement institutions or agencies

• Rust or corrosion

• Obstructions in barrels

• Finishes or Slides

• Sales of the product to second or subsequent owners

• Items purchased second hand

• Ammunition

At Lyman, customer satisfaction and quality are our top priorities.

If you are experiencing any problem with this product, 

DO NOT RETURN IT TO YOUR RETAILER.

Please, let us help. If the item has a missing part, is damaged, 

or if you need help with the instructions, 

call us toll-free at 1-800-22-LYMAN(59626) Mon-Fri 9:00am to 4:15pm (EST) 

or go to our website at www.lymanproducts.com 

and click on the Quick Link at the bottom right that says “Contact Us”.

Содержание AccuSight 7031287









Отзывы: