PAGE 2
PAGE 9
Specifications
※
Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid
using the power cord in close proximity to heaters, and never place heavy objects -- including
the unit itself -- on the power cord, as doing so may result in fire or electric shock.
※
Be sure to replace the unit's terminal cover after connection completion. Because high
voltage is applied to the speaker terminals, never touch these terminals to avoid electric
shock.
※
Be sure to ground to the safety ground (earth) terminal to avoid electric shock. Never
ground to a gas pipe as a catastrophic disaster may result.
※
Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a
slanted surface. Doing so may result in the unit falling down, causing personal injury and/or
property damage.
·If the unit falls, or the unit case breaks.
·If the power supply cord is damaged (exposure of the core, disconnection, etc.)
·If it is malfunctioning (no tone sounds.)
※
To prevent a fire or electric shock, never open nor remove the unit case as there are high
voltage components inside the unit. Refer all servicing to your nearest dealer.
※
Do not place cups, bowls, or other containers of liquid or metallic objects on top of the unit.
If they accidentally spill into the unit, this may cause a fire or electric shock.
※
Do not insert nor drop metallic objects or flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric shock.
When the Unit is in Use
※
Should the following irregularity be found during use,immediately switch off the
power,disconnect the power supply plug from the AC outlet and contact your nearest
dealer.Make no further attempt to operate the unit in this condition as this may cause fire or
electric shock.
·If you detect smoke or a strange smell coming from the unit.
·If water or any metallic object gets into the unit.
Rated Power
70W
130W
260W
360W
500W
70W
130W
260W
360W
500W
MIC. Input
LINE Input
AUX Output
Freq. Response
THD
S/N
Tone
Mute Sensitivity
Controls
Cooling Fan
Indicator
FUSE×4A
FUSE×4A
FUSE×6A
FUSE×6A
FUSE×8A
Power Cord
AC Power
Consumption
95W
175W
350W
485W
675W
Dimension
Packing Size
Net Weight
10.50kg
11.50kg
13.80kg
14.50kg
15.50kg
Gross Weight
11.80kg
13.10kg
15.40kg
15.80kg
17.20kg
AUX1/AUX2:10k ohms(Ω) 200-470 mV ,unbalanced
0.775V (0 dB)
60 Hz ~ 15k Hz (± 3 dB)
Low impedance:4-16 ohms(Ω)
Voltage line:70V(70 ohms(Ω)) 100V(143 ohms(Ω))
Voltage line:70V(38 ohms(Ω)) 100V(77 ohms(Ω))
Voltage line:70V(19 ohms(Ω)) 100V(39 ohms(Ω))
Voltage line:70V(14 ohms(Ω)) 100V(28 ohms(Ω))
89(H)×483(W)×366(D) mm
185(H)×520(W)×435(D) mm
Output Terminals
Protection
DC 12V FAN
AC:‘POWER’,level:‘2、4、6、8、10’
AC FUSE,short circuit,overload,high temperature
(3×0.75 mm
2
)×1.5M (standard)
AC220V
~
240V 50-60Hz
<0.5% at 1kHz,1/3 of rated power
Line:85 dB , MIC:>72 dB
BASS:100 Hz (± 10 dB) , TREBLE:12k Hz (± 10 dB)
MIC1 overrides MIC2/MIC3/AUX1/AUX2 with 0~30 dB attenuation
Volume controls,tone/treble control,mute control,power control
Voltage line:70V(10 ohms(Ω)) 100V(20 ohms(Ω))
MIC1/MIC2/MIC3:600 ohms(Ω) 10-15 mV ,unbalanced
MIXER AMPLIFIER
MIXER AMPLIFIER
Model Number
PB-8070
PB-8130
PB-8260
PB-8360
PB-8500
