Lycoming IVO-540 Series Скачать руководство пользователя страница 47

Страница: 47 / 84

LYCOMING OPERATORS MANUAL

SECTION 4

VO, IVO & TIVO-540 SERIES

PERIODIC INSPECTIONS

CAUTION

DO NOT OPERATE THE TURBOCHARGER IF LEAKS EXIST IN THE DUCTING OR IF

AIR CLEANER IS NOT OPERATING EFFICIENTLY. DUST LEAKING INTO AIR

DUCTING CAN DAMAGE ENGINE AND TURBOCHARGER.

b. Check for dirt or dust build-up within the turbocharger. Check for uneven deposits on the impeller.

Consult Lycoming Turbocharger Manual for method to remove all such foreign matter.

c. Check for condition of the flexible hoses in the turbocharger system. Stiffness of the hose is indicative

of deterioration and if this condition is noted the hose should be replaced before further flight.

7. 400-HOUR INSPECTION (ENGINE).

In addition to the items listed for daily pre-flight, 50-hour and 100-

hour inspections, the following maintenance check should be made after every 400 hours of operation.

Valve Inspection

Remove rocker box covers and check for freedom of valve rocker when valves are

closed. Look for evidence of abnormal wear or broken parts in the area of the valve tips, valve keeper,

springs and spring seats. If any indications are found, the cylinder and all of its components should be

removed (including the piston and connecting rod assembly) and inspected for further damage. Replace any

parts that do not conform within limits shown in Special Service Publication No. SSP-1776.

8. NON-SCHEDULED INSPECTION.

Occasionally, service bulletins or service instructions are issued by

Lycoming that require inspection procedures that are not listed in this manual. Such publications usually are

limited to specific engine models and become obsolete after modification has been accomplished. All such

publications are available from Lycoming distributors, or from the factory by subscription. Consult the latest

revision of Service Letter No. L114 for subscription information. Maintenance facilities should have an up-

to-date file of these publications available at all times.

4-5

Содержание IVO-540 Series





















































































Результаты поиска

Содержание IVO-540 Series

Отзывы:

Бренды по названию

Популярные бренды

Lycoming IVO-540 Series, Руководство оператора

Результаты поиска

Содержание IVO-540 Series

Отзывы:

Бренды по названию

Популярные бренды