H-6800 Conference set User manual
18
B.System Setting-Video Setting
Please click icon “Video Setting” on the left side of the software to enter system video setting.
1.
Please select correct camera protocol and communication interface in the software.
2.
Please tick off before "Preset", turn on microphone by "Talk" key first (or input the Mic ID in the Mic number textbox, then click "Turn on
Mic"), and please debug the camera with the software to get the clear image.
3.
Please click "Save Preset" to save the preset data after operator finish the camera debug setting of that microphone.
4.
If operator need to set video-home function, please debug camera 1 (camera id must 1) to get the video-home image, then click “video-
home" icon to save the preset.
5.
Repeat the operation to finish all microphones preset.
6.
If operator wants clear the preset data, please click "Default", then software will delete all preset datas.
7.
Please click "Preview" to check the preset and un-preset microphone address.
8.
Operator can open or close the video in software when preset microphone.
9.
If system use more than 1 camera, please select the correct camera number and confirm (click "OK") when debug the video of each
microphone.
10.
Operator can check the video image in the software if computer installed video capture card.
Note : When all the preset is saved, you can disconnect the computer from the main unit . All the preset are saved on the memory of the main
unit. No need to do this auto-track setup before each use of the conference. You must to do this setup if you move some mic of the conference.
Содержание H-6800
Страница 1: ...H 6800 Conference set User manual 1 ...
