*LY*
All in one Mixer Amplifiers
5
Performance specification
Type
PM812
PM825
PM835
Rated power
120W
250W
350W
Constant voltage output
70V, 100V
Constant impedance output
4-16Ω (balanced, not grounded)
Line input sensitivity
300mV(±50mV), 1kHz/unbalanced;
Microphone input sensitivity
3.0mV(±0.5mV), 1kHz/unbalanced;
5.5mV(±0.5mV), 1kHz/balanced
EMC input sensitivity
300mV(±50mV), 1kHz/unbalanced;
Telephone
sound
source
input
sensitivity
300mV(±50mV), 1kHz/unbalanced;
Frequency response
MIC: 100Hz-18kHz (±3dB);
TEL: 100Hz-18kHz (±3dB);
LINE: 80Hz-20kHz (±3dB);
Tune control
±10dB (Bass: 100Hz);
±10dB (Treble: 10KHz);
Signal to noise ratio
MIC: ≥55dB;
TEL: ≥65dB;
LINE: ≥75dB;
Auxiliary line output
0dBV, unbalanced
Remote microphone input
2000mV, balanced
Protection function
Overload protection, short-circuit protection, temperature protection
Total harmonic distortion
≤ 1% (1kHz, normal working condition)
Output adjustment rate
From full load to no load, ≤3dB
Power consumption
250W
500W
650W
Dimension of machine (L×W×H mm)
483×413×132
Dimension of packing (L×W×H mm)
540×510×200
Net weight
14kg
17kg
19kg
Gross weight
16.5kg
19.5kg
21.5kg
Attention
If the power switch of the equipment is “off”, the machine is not disconnected to the grid; for the purpose of
safety, please pull the power line plug out of the socket if this equipment is not in service.
This equipment shall not suffer from water dripping or spraying. Do not place the vase full of water onto the
equipment.
Do not open the cover plate of the machine without authorization to prevent electric shock. The repair shall
be conducted by the professional with professional certificate if necessary.
The terminal marked with
in the equipment indicates the hazardous electrification. The connection of
such terminal shall be completed by the trained personnel.
This equipment is connected to the power supply of the grid with the power line plug; in case of any fault or
risk in the equipment, pull out the power line plug to disconnect the connection between the equipment and
the grid; therefore, the power line plug shall be put in the place easy for plug-in/out of the power line.
LY International Electronics Co., Ltd.
