6
Operation Instructions to MP3
Connect the lines properly according to the above connection diagram, plug in the power, and turn on power switch
on the front panel. Under the default condition and after the switch-on, this equipment will play the program which
was played prior to the previous switch-off. For example, if the raio program was being played prior to the previous
switch-off, the radio program will be played automatically after this switch-on. In order to play MP3 program,
please press the “MP3/TUNE” playing operation button or “SELETCOR” key for switching.
1.
To play MP3 program
1) Start playing: Switch to MP3 playing state by the above way (If MP3 program is being played, such
operation is omitted), plug the U-disc storing MP3 program into USB interface, and the equipment start
playing automatically. Make use of the 14 buttons on the panel of the equipment to select the program to be
played and to control the suspension of playing.
2) U/SD: The MP3 player built in this equipment is able to play the program from USB interface or to playthe
program from SD interface. This equipment will select the program on the memory plugged finally to play.
For example, it is playing the program from USB interface, and then plug SD card into the equipment, and
it is switched automatically to play the MP3 program on SD card.
2.
To play tuner radio program
Switch to “TUNE” playing mode by the above way, and then start to play the radio program.
1)
To search radio station:
Make use of the button on the panel of the equipment to search automatically from the
low-frequency range to high-frequency range, and the searched radio stations will be stored to the
storage number starting from 1 in order so as to facilitate the direct invoking of the radio station in
the future.
2)
Invoking of radio station: The channel of radio station searched and stored automatically will be
invoked directly for playing in the future. Make use of hte “
or
” button on the panel of the
equipment to select the storage number in order to invoke the radio station for playing.
3.
Prompt:
If the U-disc is not plugged into this equipment prior to startup, the radio program will be played
automatically after the startup. At this moment, plug in the U-disc, and it will be switched to MP3 playing
state.
