(1)
Page 7
Rear Panel
5-ZONE USB/BT/FM/DAB+ MIXING AMPLIFIER
Connect the included power cord here.
off and will not turn on,check
the fuse and replace it if
necessary.
3. Speaker output terminals:
1. AC IN connector:
5. CD
connector:
This RCA connector receives signal from additional CD player
.
4. TUNER
connector:
7. MIC2/MIC3/MIC4 jack:
These jacks accept 6.35mm plug separately for MIC2,MIC3 or MIC4.
Fuse for protection against
surges and short circuit.If the amplifier suddenly turns
8. Phantom power switches:
This RCA connector receives signal from additional tuner player
.
6. AUX2
input jack:
Push to switch on or off 48V Phantom Power separately for MIC1,MIC2,MIC3 or MIC4.
These RCA jacks receive signal from additional audio source device.
10. MIC5/AUX1 switch
:
9. AUX1 input jack:
Push this button to switch between MIC5 and AUX1 input.
11. BT ANT. connector:
This 6.35mm jack receives signal from additional audio source device.
Connect the included bluetooth antenna here.
12. TUNER
ANT
.
connector:
Including 70/100-volt,4 or 8 ohms(Ω) output loads,please refer to page 11-12 for more details.
2. Fuse
:
Supply signal to additional amplifier.
13. LINE output:
Supply signal to record device.
14. REC. output:
Connect the included DAB+/FM antenna here.
15. MIC1/MIC2/MIC3/MIC4/MIC5 XLR jack:
These balanced XLR connection separately for MIC1,MIC2,MIC3,MIC4 or MIC5.
(2)
(3)
(4) (5)
(6)
(7)
(8) (9)
(10)
(11)
(12)
(13) (14)
(15)
PA AMPLIFIER SERIES
Https://www.lyintl.com/
