Setting SIP
1. First of all, configure your SIP server, including user name and server information.
The test server can use mini SIP server and the test terminal can use SIP phone
etc. Please test and ensure that the communication of host and the test terminal is
normal after information configuration.
2. Opening network PA management software, right-click the device zone in the zone
interface and select the pop-up menu “SIP information”.
Push the product parallel to the cabinet, so that the mounting holes on both sides
of the product are aligned with the mounting holes on both sides of the cabinet
and fixed with screws. (As shown below)
Rack mounting
Cabinet
1
2
3
4
Install pendant
1
2
3
4
Ensure normal heat dissipation
In the use of equipment rack, each unit can be directly stacked installation.
Please use the empty panel to close the open space in the rack. (open space will
reduce heat dissipation efficiency) Please do not block the ventilation holes
before and after. Gas flow from front to back.
5
6
Pendant
installation
Fix L-shaped mounting attachments on both sides of the front of the chassis.
(
As
shown
below
)
1
2
3
4
www.lyintlcorp.com
LY International Electronics Co., Ltd.
