Fire control/public address system
paging selector
Remote paging selector
M-2588
7
"partition page" button displays the white side), then touch the partition button that gives paging to
select the partition (the selected partition turns pink), and then touch this partition to end the paging
(the color changes to green).
When paging all partitions, firstly select the "partition page" button on the upper right corner, then
touch the “partition fully-open” to page all partitions, then touch the “Partition Off” button to stop
paging.
Note: After paging, touch the small microphone icon
in the upper right corner, the microphone will
be turned on, the small icon will turn green, and then touch again to close it. When the partition is
fully open, the microphone will be opened. When the partition is fully closed, the microphone is
turned off.
4.2.4 Grouping state display
Four grouping states, as shown below:
4.2.5
Grouping Paging Operation
Grouping paging operations:
Touch the "Group paging" icon in the upper right corner of the main menu (the selected "partition
page" button displays the white side), then touch the corresponding group button to start the page.
Touch the packet again to stop paging and let the paged groups resume the state before the paging
operation.
To page all groups, first select the "Group Paging" button on the upper right corner, then touch the
"Group fully –open" button to select all groups to start paging. Touch the "Group fully-closed” button
to stop paging.
Note: After paging, touch the small microphone icon
on the upper right corner, the microphone will
be turned on, the small icon will turn green, and then touch again to close it.
