8
How to set: In the main interface state,
press “Menu” key, then press three times “
” key to switch to the
language setting menu page,
press “
” key enter the language selection, press“
” or “
”to select the
menu language,
after setting press “Menu” key to return (The main unit will automatically saves the
parameters which is selected and starts executing the parameters for the new settings).
4.1.8 Safety setting
By setting up security actions, user can select IC management Card or unlimited. When select the IC
management card mode, user needs to insert the IC management card to set or change anything on the
main unit; If the IC card is not inserted correctly (not original IC card), the main unit will not be able to operate.
The display screen will show
“Please insert IC card”. If setting the unlimited mode, there will be no need to
insert the IC card then everyone can operate the main unit.
How to set: In the main interface state,
press “Menu” key, then press four times “
” key to switch to the
safety setting menu page,
press “
”key to select, press “
”or “
”to select the safety setting option,
after setting press “Menu” key to return (The main unit will automatically saves the parameters which is
selected and starts executing the parameters for the new settings).
4.1.9 Microphone ID number setting
In the system ID number for each microphone must be unique and must be setting in 1-250 range. Which
means in the same system every microphone`s ID number cannot be repeated and cannot be setting over 1-
250 range (The system already limits the users only can select in 1-250 range). Otherwise, the system will
not work properly.
How to set: In the main interface state, press
“Menu” key, then press five times “
” key to switch to the ID
setting menu page,
press “
”key enter to set, the unit ID number can be set sequentially, press “
” or
“
”to select the starting ID number, Selecting the ID number from the main unit, after the ID number setting
information is launched, when choosing the ID number is 001, main unit will shows
At this moment please turn on the microphone power and keep pressing the (MIC) key immediately until the
screen shows:
Release the (MIC) key, and press one-time (MIC) key, the screen will show:
After 3 seconds the main unit screen will display:
Now the ID 001 microphone unit is finished the setting, turn off the power of ID 001, the main unit screen will
show
“setting ID 002...”:
