background image

*LY*

   

                     

                                                                                     

                                            Paging Microphone 

 

Performance Specification 

Mic input sensitivity   

10±2mV (unbalanced input) 

Line input sensitivity   

2±0.1V (balanced input)   

Signal output   

2±0.1V (balanced output)   

Frequency response   

Mic: 100Hz~15kHz (±3dB);   

Line: 20Hz~20kHz (±3dB) 

Signal to noise ratio   

Mic input ≥60dB 

Line output ≥70dB 

Dimension  of  equipment 

(L×W×H mm) 

220

×

136

×

44mm 

Packing size (L×W×H mm)  270×190×275mm 

Net weight   

1.5kg 

Gross weight   

2.1kg 

 

 

 

 

 

 

 

 

 

 

 

 

 

LY  International  Electronics  Co.,  Ltd.

 

Attention 

 

If the power switch of the equipment is “off”, the machine is not disconnected to the grid; for the purpose of 

safety, please pull the power line plug out of the socket if this equipment is not in service.   

 

This equipment shall not suffer from water dripping or spraying. Do not place the vase full of water onto the 

equipment.   

 

Do not open the cover plate of the machine without authorization to prevent electric shock. The repair shall 

be conducted by the professional with professional certificate if necessary. 

 

The  terminal  marked  with

  in  the  equipment  indicates  the  hazardous  electrification.  The  connection  of 

such terminal shall be completed by the trained personnel. 

 

This equipment is connected to the power supply of the grid with the power line plug; in case of any fault or 

risk in the equipment, pull out the power line plug to disconnect the connection between the equipment and 

the grid; therefore, the power line plug shall be put in the place easy for plug-in/out of the power line.     

 

Содержание CM12












Отзывы: