LXI Fiber Optic Multiplexer – 60-850/851
pickering
test
.com
Specifications
Operating/Storage Conditions
Operating Conditions
Operating Temperature:
Humidity:
Altitude:
0°C to +55°C
Up to 95% non-condensing
5000m
Storage and Transport Conditions
Storage Temperature:
Humidity:
Altitude:
-20°C to +75°C
Up to 95% non-condensing
15000m
Safety & CE Compliance
All modules are fully CE compliant and meet applicable EU
directives: Low-voltage safety EN61010-1:2010, EMC Immunity
EN61326-1:2013, Emissions EN55011:2009+A1:2010.
Mechanical Characteristics
Supplied with front panel ears to enable rack mounting on a shelf or
other rear support mechanism.
Dimensions:
1U high, full rack width, 340mm depth
3D models for all versions in a variety of popular file formats are
available on request.
Cooling
Fan assisted cooling, side air intakes and rear exhaust.
LAN Interface
Compliant to LXI Standard 1.4, the 60-850/851 has a 1000Base-T
Ethernet Interface via a standard RJ-45 connector mounted on the
rear panel with an LCD display showing the unit’s IP address*.
*Note: Legacy units may not have 1000Base-T support or be fitted
with an LCD display.
LXI Status Indicators
Front panel mounted LEDs:
• Power
• Ready
• Error
• LAN
• Active
Switch Indicators
LED indicators show the selected MUX channel.
Connectors
Signals via front panel connectors as Product Order Codes.
Connector Protection
Supplied with tethered dust caps for use when not connected to an
external fiber connector.
Power Source
Universal AC mains supply, 90-264VAC, 50-60Hz
Power Inlet:
Male IEC connector
on rear panel
Single-Mode Specification
Fiber Switch Type:
MEMS
Available Connector Types:
FC/APC, FC/PC, SC/PC,
MU, LC.
Wavelength:
1240nm to 1640nm
Internal Fiber Type:
SM 9/125
Insertion Loss:
1dB typ (8:1 version)
1.5dB typ (16:1 version)
1.5dB typ (8:1 loop-thru)
2dB typ (16:1 loop-thru)
2.5dB typ (32:1 version)
Return Loss:
60db min (APC version)
55dB min (other versions)
Polarization Dependent Loss
(PDL):
0.05dB max
Repeatability:
±0.01dB max
Crosstalk:
-60dB max
Recommended Input Power:
+20dBm Above this level a
small increase in insertion
loss may be experienced,
typically less than 0.1dB
at +27dBm. Damage level,
>+30dBm continuous.
Thermal Stability (-10 to 75°C
insertion loss variation):
0.2dB max
Expected Life:
>>10
9
operations
Maximum Switching Time:
1ms
Cycle Rate:
500/sec
Multi-Mode Specification
Fiber Switch Type:
MEMS
Available Connector Types:
SC, ST
Wavelength:
700nm to 1700nm
Internal Fiber Type:
MM 62.5/125
Insertion Loss:
1dB typ (8:1 version)
1.5dB typ (16:1 version)
1.5dB typ (8:1 loop-thru)
2dB typ (16:1 loop-thru)
2.5dB typ (32:1 version)
Return Loss:
55dB min
Polarization Dependent Loss
(PDL):
0.05dB max
