Set Up A New VX3X
Note: LXE recommends that installation or removal of accessories be performed on a clean, well-lit surface. When
necessary, protect the work surface, the VX3X, and components from electrostatic discharge.
While the VX3X is in a Hazardous Location DO NOT:
l
Connect an external power source to the VX3X.
l
Connect a USB device or audio jack to the VX3X.
l
Connect a tethered scanner to the VX3X.
l
Place the VX3X in a powered dock or cradle.
Hardware Setup
1. Connect accessories.
2.
.
3. Connect power cable.
4. Secure all cables to the VX3X with the Strain Relief Cable Clamps.
5. Press the Power key.
Software Setup
Prerequisite
: Hardware setup is complete.
1.
2.
3.
4. Setup
parameters
5.
to the registry
6. Setup the LXE AppLock parameters
7. Set the LXE Scanner Wedge parameters
E-EQ-VX3XOGWW-G-ARC [ 1 ] VX3X User Guide
