Cleaning the Touchscreen and Scanner Aperture
Cleaning the Touchscreen and Scanner Aperture
Note: These instructions are for components made of glass. If there is a removable protective film sheet on the display,
remove the film sheet before cleaning the screen.
Keep fingers and rough or sharp objects away from the scanning aperture and the mobile device touchscreen.
If the glass becomes soiled or smudged, clean only with a standard household cleaner such as Windex® without vinegar or
use Isopropyl Alcohol. Dampen the cloth with the cleaner and then wipe the surface.
Do not use paper towels or harsh-chemical-based cleaning fluids since they may result in damage to the glass surface. Use a
clean, damp, lint-free cloth.
Do not scrub optical surfaces. If possible, clean only those areas which are soiled. Lint and particulates can be removed with
clean, filtered canned air.
Setup Terminal Emulation Parameters
Before you make a host connection, you will, at a minimum, need to know:
l
the alias name or IP address (Host Address) and
l
the port number (Telnet Port) of the host system to properly set up your host session.
1. Make sure the mobile client network settings are configured and functional. If you are connecting over wireless LAN
(802.11
x
), make sure your mobile client is communicating with the Access Point.
2. From
Start | Program
, run
LXE RFTerm
or tap the RFTerm icon on the desktop.
3. Select
Session | Configure
from the application menu and select the "host type" that you require. This will depend on
the type of host system that you are going to connect to; i.e. 3270 mainframe, AS/400 5250 server or VT host.
4. Enter the "Host Address" of the host system that you wish to connect to. This may either be a
DNS name or an IP
address of the host
system.
5. Update the
telnet port number
, if your host application is configured to listen on a specific port. If not, just use the
default telnet port.
6. Select
OK.
7. Select
Session | Connect
from the application menu or tap the "Connect" button on the Tool Bar. Upon a successful
connection, you should see the host application screen displayed.
To change options such as Display, Colors, Cursor, Barcode, etc., please refer to these sections in the
RFTerm WebHelp
for
complete descriptions of these and other features.
E-EQ-VX3XOGWW-G-ARC [ 20 ] VX3X User Guide
