Operation
21
E-EQ-MX1ISOGWW-J
MX1 I-Safe User’s Guide
MX1-IS Environmental Specifications
Operating Temperature
14°F to 104°F (-10°C to 40°C) [non-condensing]
Storage Temperature
-22°F to 140°F (-30°C to 60°C) [non-condensing]
Water and Dust
IEC IP65 Category 1 (with IP65 endcaps)
Operating Humidity
5% to 95% non-condensing at 104°F (40°C)
Vibration
Based on MIL Std 810D
ESD
8 kV air, 4kV direct contact
Shock
Multiple 4 foot drops to concrete
I-Safe Main Battery
Note:
New batteries must be charged prior to use. There is
no
backup battery in the MX1-IS
device.
The MX1-IS computer is designed to work with a Lithium-Ion (Li-Ion) battery pack from LXE.
Under normal conditions it should last approximately eight hours before requiring a recharge. The
more you use the scanner or the radio transmitter, the shorter the time required between battery
recharges.
Battery Pack
The battery pack is a rugged plastic enclosure that is designed to withstand the ordinary rigors of
an industrial environment. Exercise care when transporting the battery pack making sure it does
not come in contact with excessive heat or any power source other than the LXE MULTI-charger
unit.
Critical Suspend State
The Critical Suspend state or mode can only be entered because of a Main Battery Power failure.
A Main Battery Power failure can occur because the main battery pack’s energy has been
depleted.
When the MX1-IS is in the Critical Suspend state the battery icon appears on the screen, the Status
LED blinks red, all peripherals are shut down, the CPU clock is stopped, power is removed from
the PCMCIA card and the MX1-IS may beep. The MX1-IS is saving the state prior to the main
battery failing and cannot be used.
If the Off Timer expires the MX1-IS will turn itself off and all
unsaved information
is lost. Insert a
fully charged battery pack and press the Power button to turn the MX1-IS back on.
Note:
The Off Timer can be configured in the BIOS Setup (see the “MX1 I-Safe Reference
Guide.”)
