LX Navigation LX Eos 57, Руководство пользователя

Страница: 7 / 49

Document Name:
LX Eos user’s manual
Version: 1.7
Page 6 of 47
1.3 Switching on the unit
To switch the unit on, press push button on rotary switch until LX Navigation logo is shown on LCD screen.
Device name with serial number and software version information will follow after logo. After boot procedure,
the initial setup with pilot selection and elevation/QNH setup will be shown. If device is used in LX Zeus
configuration, it will turn on when LX Zeus main switch is turned on (no need to push the button). Initial setup
screen is not visible, because all initial setup is done on LX Zeus unit.
1.4 Switching off the unit
When on ground (flight recorder is not running), disconnect main power supply from system. LX Eos will
start to count down 3 seconds before it will turn off. If you are flying (LX Eos detects IAS
–
indicated air
speed and flight recorder is running) it will not switch off until flight is ended. Flight will end 10min after
landing or manually by the user. How to manually end flight, please refer to section of statistic page.
2
Use of rotary switch
To move around and access all functions of the unit, one rotary switch with push button is used.
Push button operation will be later in manual called as
“enter”.
To change value of setting, enter must be pressed to activate field (white frame will change to yellow).
Yellow frame indicates that selected value can be changed by rotation of rotary switch.
To exit edit mode press enter again (frame becomes white again).
For quick change (multiplication by 10 steps) press enter button and while being pressed, rotate rotary
switch.