PREPARATION
1.Installing batteries/Connecting the AC adaptor
Batteries
Battery Remove the battery compartment
compartment cover and insert three batteries(AAA
size) into the battery compartment,
taking extreme care that the polarities
plus and minus is observed.
Battery compartment cover AAA size Dry batteries.
AC adapter
Plug the AC adapter to the AC
AC adaptor
adapter socket on the back.
socket
The AC input requirement could
be 110,120,220,230 or 240Volts
(50/60Hz) depending on the area
where used, so please verify that
the adaptor is correct
2.Setting up the scale
Avoid installing the scale in direct sunlight that may cause discoloration or
malfunctions. Place your scale on a firm weighing table so that the scale is
level. (The scale will not perform accurately when it is not level.)
Place the scale on the firm surface that is flat and level for an accurate
weighing. Do not use scales onto the carpet base, it may cause scales
inaccurate and need re-calibration.
3
WEIGHING
Before weighing
Whenever possible, please allow the balance to warm up for 10 minutes
after first turning to power on, so that the balance will function properly and
accurately.
Error messages
Err-0: Overload
: Low battery
Weighing procedures
1.
Press
[ON/OFF/ZERO]
to turn on the scale. The display will show all
segments for a few seconds and then "0" will appear on the display.
2.
Select the weighing unit by pressing
[UNIT]
key. e.g. "kg/g/lb/oz/lb:oz
”
3.
The selected unit will be display on the cursor next to the weight value.
4.
Start weighing. Make sure the display is “
0
”, if not press the
[ON/OFF/ZERO]
key to zero the scale.
5.
If you are using a container or tray, place the empty container on the
scale, wait for 3seconds, press
[ON/OFF/ZERO]
, the display will read “0”
with the tray or container on top.
6.
Place your objects to be weighed on the container. The display will
show the net weight value.
4
