TARE
key
Tare Range (100% to full capacity)
ZERO
key
Set display to zero or
Zero Range (4% to full capacity)
DISPLAY
Low battery indicator Weighing unit
Negative value indicator
ZERO
indicator Hold indicator
Indicates when the reading is 0
2
HOLD FUNCTION
1)
Place the item on the scale platform.
2)
Wait for the weights to be displayed.
3)
Press the [HOLD] key. The “
.
” hold indicator will turn-on.
4) Remove the item from the scale platform. The item’s weight reading will
remain on the display. You can now also convert this to other measures (i.e.
to Pounds or Kilograms) by pressing the [UNIT] key.
5) Quit hold function: Once an item is weighed and the hold function is
enabled; you want to quit to hold function, Press the [HOLD] key again to
cancel the “
.
” hold indicator and return the scale to weight mode.
WEIGHING
Before weighing
Whenever possible, please allow the scale to warm up for several seconds
after first turning the power on so that the scale will function properly and
accurately.
Error messages
EEEE: Overload
: Low battery
Err-Z： Exceed zero track range when turn on the power
Err- S: The scale is unstable when turn on the power
Err- C: Forget to input calibration weight when calibrating or the AD value is
too low.
Weighing procedures
1.
Press [ON/OFF] to turn on the scale.
When the power is turned on, all display segments appear for a few seconds
and "0" will appear on the display.
2.
Select the weighing unit with [UNIT].
Press
[UNIT]
to select a weighing unit "kg", "lb".
Once the unit has been selected, the selected unit will be displayed next to the
weight value.
