User Manual 79 39 080c | MagniLink Zip
19
8.
Accessories
There are two accessories for MagniLink Zip:
1.
Battery
2. Trolley
Battery
Order.nr: MLZIPBAT
The battery can provide up to 2,5 hours of operating time.
Safety information
•
Do not remove cover on any part. No user serviceable parts inside.
•
Do not incinerate, disassemble, short circuit or heat the battery
above 176 °F (80 °C).
•
Only use designated charger.
Maintenance
Charge the battery at least every six months. The battery has no memory
effect. That means that the battery can be charged at any time,
regardless of the amount of discharge.
Operation
During operation the system will be configured as:
BATT.PACK -----> DC/DC CONVERTER -----> MLZIP
1)
Connect the green marked DC-cord from the DC/DC-converter to
the connector at the back of the screen.
2)
Connect the yellow marked DC-cord from the DC/DC-converter to
connecter at the battery, also marked yellow.
Power Meter
The battery status can be checked by pressing the TEST button on the
battery. The power meter consists of five LED`s. A red LED will flash to
indicate when the battery is low. You can stop the alarm by pressing
TEST once. If you press TEST again, the alarm will operate again.
Charging
During charging the batterypack will be configured as:
BATTERY PACK -----> BATTERY CHARGER ------>WALL CONNECTOR
