MagniLink S PREMIUM - PC
User Manual 7944447a | MagniLink S PREMIUM - PC
15
3.
External control panel
An external control panel can be connected via this input.
6.2
Using the hardware
6.2.1
Control box
1.
LED
A green light indicates that the system is on. A flashing green light
means that the system is starting up. A slowly flashing yellow light
indicates standby. A red light indicates that something is wrong in
the system. See the chapter on Troubleshooting page 43.
2.
Power on/off
Press to start or shut down the system.
3.
Lighting configuration
Used to configure the light intensity in order to optimize reading
conditions. Press the upper half to increase the light intensity and
the lower half to decrease it. For systems that have LED lighting,
the intensity is adjusted by holding down the button (7).
4.
Autofocus on/off
Press the button once to lock the focus. This can be used when
you wish to write by hand. Autofocus is not affected by the pen or
your hand. Press the button a second time, to reactivate
autofocus.
5.
Zoom control
Used to set the zoom. To reduce the zoom, press the lower key
(minus) and to increase the zoom, pressure the upper key (plus).
